You should hold the heat gun between 8 and 12 inches from the car, so as not to burn the clear bra. Start with a small portion of the clear bra, and hold the heat gun over it for one or two minutes, until the protective film is sufficiently warmed up. When using the heat gun, you want to work in patches. Step 2: Use a heat gun or hot steam gun to apply heat. If the clear bra is coming off very slowly, in tiny pieces, then the process will take a little bit longer, and you will definitely need to use a heat gun. If the protective film comes off in large strips, then the next steps will be a little easier, and you can even skip the heat gun if you’d like.

Use a soft, non-metal scraper, and start at a corner, where you can get underneath the protective film. To get a feel for how hard the process will be, try to scrape the bra away at one corner. Step 1: Gently try to scrape the clear bra away. Part 1 of 1: Remove the 3M protection film You may think that there’s no fixing a clear bra that gets to this stage, but with a little bit of work and patience, you will be able to completely remove the 3M clear protection film, and get the front of your car back to looking the way it should. At this point the clear bra starts to become an eyesore, but it is also very difficult to remove. As this protection film ages, it becomes dry and brittle. The clear bra is the 3M clear protection film that covers the front of your vehicle and helps protect it.

How to uninstall safe price